YGP045187 Genuine Induction Driver PCB Slave Board for Falcon Induction Cookers, Induction Power Board Replacement

Part YGP045187 is a genuine induction driver PCB, the slave board. In an induction hob, the driver boards supply the high frequency power that runs the coils, and on larger hobs the work is often shared between a master board and one or more slave boards. This is the slave. We list it for Falcon induction cookers. Make sure a technician has confirmed the slave board is at fault, and check YGP045187 against your parts list.

Symptoms of a failed induction slave board

When a slave driver board fails, the zones it powers stop working while the zones on the master board carry on as normal. You might see an error code, zones that switch off after a few seconds, a pan detection symbol that flashes even with a suitable pan, or the circuit breaker tripping when certain zones are used. Power surges, heat build-up from blocked cooling vents, and spills seeping under the glass are common causes. Clear the vents and check the cooling fan when replacing the board.

Part details

• Genuine part number YGP045187
• Induction driver PCB, slave board
• Powers the induction zones wired to it

Fitting must be done by a licensed electrician

Induction boards carry mains voltage and can hold a charge after the power is cut, so this is a job for a licensed electrician or qualified technician. Isolate the cooker at the switchboard and wait before touching the board. Photograph every connector and coil lead, refit any thermal pads or heat sink compound as required, and test each zone after reassembly.

Questions about this part

How do I know whether I need the master or the slave board?

Note which zones have failed and any error codes, then have a technician test the boards. The board label and the cooker's parts list will show which number is the slave. YGP045187 is the slave driver PCB only.