YGA049746 Genuine Induction Unit 2.2kW 210mm for Falcon Induction Cookers, Induction Cooking Zone Coil Replacement

YGA049746 is a genuine 2.2kW induction unit with a 210mm diameter, the coil assembly that sits under the glass and heats one cooking zone. It's listed for Falcon induction cookers. If one zone has stopped heating while the others work, and the fault has been traced to the coil rather than the electronics, this is the replacement for a 210mm, 2.2kW zone. Check YGA049746 against your appliance's parts list first.

How an induction zone works and fails

An induction unit is a flat copper coil that creates a magnetic field when the power board feeds it. That field heats the base of a magnetic pan directly. When a coil fails, the zone may show no heat, pulse weakly, display an error code, or buzz loudly when switched on. Cracked or overheated coils, broken insulation and burnt connections are typical causes, often after a pan has boiled dry. The power board and coil work as a pair, so a technician should test both before ordering.

Part details

• Genuine part number YGA049746
• Induction unit rated 2.2kW
• 210mm diameter
• Replaces the coil under one induction cooking zone

Installation by a licensed electrician

Induction cookers are normally hard-wired, so isolate power at the switchboard and have the repair done by a licensed electrician or qualified appliance technician. The glass top usually has to be lifted to reach the coil. Note the coil's orientation and wiring, refit any spacers or sensors exactly as before, and test the zone with a suitable induction pan.

Questions about this part

What does 2.2kW D210 mean?

It describes the induction unit's rating and size. 2.2kW is its power and 210mm is its diameter, which matches one cooking zone. Your replacement must match both figures and the part number to work correctly with the cooker's power board.