TIEPR9045 Genuine Oven Door Hinge for Eurostyle Group Ovens, Old Style Ovens Also Need TIEPR9048 Hinge Supports

Genuine oven door hinge TIEPR9045 suits Eurostyle Group ovens. One thing to check before ordering: if your oven has the old style hinge, this one won't fit the existing hinge supports, and you'll also need the newer design supports, part TIEPR9048. Ovens already fitted with the newer supports only need the hinge. No brand or model list is on file, so confirm the part number or send us the oven's model and serial details.

Why an oven door hinge fails

Oven door hinges work hard. They carry a heavy glass door, are spring loaded to hold it shut against the seal, and sit in a hot area. Over time the spring tires, the pivot wears, or the hinge bends when someone leans on the open door or rests a heavy dish on it. You'll notice the door dropping open too easily, not closing fully, sitting crooked or letting heat escape around the top edge, which can make the controls run hot. A broken hinge can also let the door fall, so replace it promptly.

Part details

• Genuine Eurostyle Group part TIEPR9045
• Oven door hinge
• Ovens with the old style hinge also need TIEPR9048 hinge supports
• Replaces a bent, worn or broken door hinge

Fitting TIEPR9045 and the TIEPR9048 supports

Turn the oven off at the switchboard and wait until it's cold. Remove the door with a helper and support it on a towel. Compare the old hinge and its supports with the new parts. If the old supports are the earlier style, fit the TIEPR9048 supports first, then the new hinge. Refit the door and check it closes squarely and seals evenly.

Questions about this part

How do I know if I need the TIEPR9048 supports?

If your oven still has the old style hinges, the new TIEPR9045 hinge needs the newer TIEPR9048 supports to mount. Send us your oven's model and serial number through the parts enquiry form and we'll confirm whether you need the supports as well.