SYSS6008A15 Genuine Rangehood Slide Switch Section for Baumatic, Euromaid Rangehoods GUH52 GUH52SD GUH75 GUH90 HSL60S

Part SYSS6008A15 is the genuine slide switch section used on Baumatic and Euromaid rangehoods. It's the sliding control you move to change the hood's settings. Models on file are the GUH52, GUH52SD, GUH75, GUH90 and HSL60S. If your hood uses a slider control and the model matches one of these, SYSS6008A15 is the replacement section to order.

Rangehood slide switch faults

The slide switch section is what you move to select the hood's settings, so it opens and closes the circuits feeding the fan and, on many hoods, the light. With age, grease works into the slider and the contacts wear, leading to a control that feels gritty or loose, a fan that only runs on some settings, or a hood that won't switch on or off reliably. A cracked or broken slider is another common reason to replace it. If the motor runs when tested on its own, the switch section is the next thing to check.

Part details

• Genuine part SYSS6008A15
• Slide type control switch section
• Listed for Baumatic and Euromaid rangehoods
• Models on file: GUH52, GUH52SD, GUH75, GUH90 and HSL60S

Replacing the slide switch

Unplug the rangehood, or isolate it at the switchboard if it's hard-wired. Remove the filters and the cover over the controls. Photograph the wiring and the slider position before disconnecting anything, then fit the new section the same way. Check each setting works before refitting the filters. Hard-wired hoods should be connected by a licensed electrician.

Questions about this part

Where is the model number on my rangehood?

On most hoods the compliance label is inside the canopy, visible once the grease filters are out. Look for a model such as GUH52, GUH75 or HSL60S and match it to the list for SYSS6008A15.