IL063 Generic 10 Position Oven Selector Switch suits ILVE Ovens P90NMP-M, Same Switch as ILVE A/034/09

This aftermarket 10 position selector switch, part IL063, suits ILVE ovens and is listed against the ILVE P90NMP-M. It's the same switch as ILVE number A/034/09, so if that code is on your old switch or your ILVE parts list, you're in the right place. The selector is the rotary switch behind the function knob that decides which elements and fan run for each setting. Being generic, it isn't made by ILVE.

When an ILVE oven selector switch needs replacing

Each position on the selector connects a different combination of elements, fan and light, so the oven knows which function you've picked. Over years of turning, the internal contacts pit and burn, especially on the heavy element circuits. Typical signs are one function that has stopped working while others are fine, an oven that only heats on some settings, a knob that feels loose or crunchy, or scorched wires and melted plastic at the back of the switch. Sometimes the oven trips the safety switch on one setting only. Rule out a dead element before blaming the switch.

Part details

• Generic aftermarket selector switch, part number IL063
• 10 positions
• Same switch as ILVE A/034/09
• Listed for the ILVE P90NMP-M oven
• Aftermarket part, not made by ILVE

Fitting the selector switch

Switch the oven off at the isolator before removing the control panel. ILVE ovens are hard-wired, so this job belongs with a licensed electrician. Photograph every terminal and its wire colour before unplugging anything, as the pin layout is easy to get wrong. Check the shaft shape and length match the old switch so the knob fits. Refit the panel and run each function to confirm it works.

Questions about this part

Is IL063 the same as ILVE A/034/09?

Yes, our records list IL063 as the same switch as A/034/09. IL063 is a generic part rather than one supplied by ILVE, so compare the pins and shaft with your old switch before fitting.