HC047 Generic Dishwasher Drain Hose 2.5m Long Universal Dishwasher Outlet Hose Part

HC047 is a generic 2.5 metre drain hose for dishwashers, sold as a universal replacement. It carries waste water from the dishwasher's pump to your sink waste or standpipe. The extra length helps when a dishwasher is moving to a new spot or the original hose won't quite reach. Compare both ends with your current hose before ordering, as connections vary between brands.

Dishwasher not draining or leaking underneath? Check the drain hose

Every cycle, the drain pump pushes dirty water out through this hose, so it has to stay clear, sealed and free of sharp bends. Hoses split with age, get crushed behind cabinets or kink when the machine is pushed back into its space. Typical signs are water left in the bottom of the tub at the end of a wash, slow emptying, or puddles under the kitchen bench. A hose that's too short can also pull off its spigot. Swapping it for a longer, undamaged hose is a cheap fix.

Part details

• Part number HC047, generic universal hose
• 2.5m length
• Carries waste water from the pump to the sink waste or standpipe
• Handy where the original hose is too short

Replacing a dishwasher drain hose

Turn the dishwasher off at the wall and close the tap before pulling it out. Keep a towel and a shallow tray handy, as some water will run out of the old hose. Fit the new hose with a secure clamp at the pump end, run it without kinks, and loop it up high before it reaches the sink waste so dirty water can't siphon back. Run a short cycle and check for leaks.

Questions about this part

Will this hose fit my dishwasher?

HC047 is a universal hose, so it suits many dishwashers, but end fittings differ between brands. Measure the spigot on your pump outlet and compare the old hose's ends before buying. You may also need clamps to secure it.