H0530062212 Genuine Rangehood Chimney Extension 900mm for Haier, Fisher & Paykel Wall Canopy Rangehoods, Flue Cover Extension

H0530062212 is a genuine chimney extension for wall mounted canopy rangehoods from Haier and Fisher & Paykel, listed at 900mm. The chimney is the decorative cover that hides the ducting between the rangehood and the ceiling, and an extension lets it reach further on taller ceilings. This is the wall version. Island rangehoods take a separate island extension.

When you need a rangehood chimney extension

Canopy rangehoods come with a chimney sized for a typical ceiling height. In kitchens with high or raked ceilings, or where the hood is mounted lower over the cooktop, the standard chimney leaves a gap and exposed duct above it. An extension fills that gap so the installation looks finished and the duct is covered all the way up. Extensions are also bought when the original chimney cover is dented, scratched or lost during a renovation. Measure from the top of the hood to the ceiling and compare with the chimney options in your installation manual before ordering.

Part details

• Genuine part H0530062212
• Chimney extension for wall canopy rangehoods
• Listed as 900mm
• Island rangehood extensions are a separate part

Installing the extension

Switch the rangehood off at the wall or isolator before you start. Confirm with a tape measure that the extension gives the coverage you need. The extension normally works with the existing chimney sections, and the duct inside may also need lengthening to reach the ceiling outlet. Rangehoods that are hard-wired must be disconnected and reconnected by a licensed electrician.

Questions about this part

Does 900mm mean the extension length or the rangehood width?

The part is listed as 900mm, but that figure isn't explained further in our records. Check the chimney options in your rangehood's installation manual, or send your model number through the parts enquiry form and we'll confirm before you order.