H0184000001 Genuine Water Level Switch for Fisher & Paykel, Haier Clothes Dryers, Condensate Water Level Switch

Part H0184000001 is a genuine Haier water level switch from the Fisher & Paykel and Haier dryer range. Dryers that collect condensed water use a switch like this to sense how much water has built up in the base. There's no model list on file. Find the number on your old switch, or send your dryer's model number through the parts enquiry form so we can check.

Tank full light on with an empty tank? Check the level switch

Condenser and heat pump dryers turn moisture from the clothes into water, which collects in a sump before being pumped to the tank or drain. The water level switch tells the control board when that sump is filling, so it can run the pump or stop the dryer and warn you. A faulty switch can trigger a tank full warning when the tank is empty, stop the dryer part way through, or fail to start the pump so water overflows inside the base. Lint in the sump can jam the float, so clean it before replacing the switch.

Part details

• Genuine Haier part H0184000001
• Water level switch for dryers
• Fisher & Paykel and Haier dryer range
• Confirm by the number on your old switch

Replacing the level switch

Unplug the dryer and empty the water tank. Expect some water in the base, so have towels ready. Photograph the wiring and hose connections on the old switch before you remove it. Clean any lint out of the sump, fit the new switch, and run a drying cycle to confirm the pump runs and the tank fills.

Questions about this part

Does my dryer need this switch?

It's used in dryers that collect condensed water. Vented dryers that blow moist air outside don't normally have one. Send your model number through the parts enquiry form if you'd like us to confirm.