H012G1610002 Genuine Front Adjustable Foot for Haier Dishwashers, Dishwasher Levelling Foot, Front Height Adjuster Leg

H012G1610002 is a genuine Haier adjustable foot for the front of the dishwasher. Turning it raises or lowers that corner, which is how the machine is levelled and lined up with the benchtop and cabinets around it. We don't have a note on whether it's specific to freestanding or built in models, so compare it with the foot you're replacing and confirm the number in your parts list.

Front foot broken or seized?

The front feet carry much of the dishwasher's weight, plus the extra load every time the door is pulled down and a full basket rolls out onto it. That's why front feet are the ones most likely to crack, strip their adjusting thread or snap off when the machine is dragged across tiles. With a foot missing, the dishwasher leans forward or sideways, the door can rub on the kickboard, and water may run toward the front of the tub and seep past the door seal. On built in installs, a low front corner also leaves an uneven gap under the benchtop.

Part details

• Genuine Haier part H012G1610002
• Adjustable foot for the front of the dishwasher
• Used to level the machine and set its height
• Rear feet are separate part numbers

Swapping a front foot

With the power off at the wall and the tap closed, ease the dishwasher out far enough to work on the front corners. Lift the front edge a little with a helper or a padded lever, swap the foot and lower it gently. Wind each front foot up or down until the machine is level and the door closes evenly without touching the panels either side.

Questions about this part

Can I use this foot on the back of the dishwasher?

It's listed as the front foot, and Haier gives the rear feet their own numbers, sometimes with separate built in and freestanding versions. Fit H012G1610002 to the front and order the matching rear foot if the back needs one too.