H012G1451092B Genuine Rear Adjustable Foot for Haier Freestanding Dishwashers, Dishwasher Levelling Leg, Back Foot Replacement

This is the genuine rear adjustable foot for Haier freestanding dishwashers, part number H012G1451092B. It adjusts up and down to set the height at the back of the machine, so you can level it on an uneven floor. Haier makes a separate rear foot for built in dishwashers and a different foot again for the front, so check you've got the freestanding rear version, H012G1451092B, before ordering.

Why dishwasher levelling matters

A dishwasher that isn't level does more than wobble. The door may not line up with the tub, so it fails to seal and drips at the bottom corners. Water can pool to one side of the base, which upsets the float or fill sensing on some models, and a machine that rocks will rattle and creep while the pumps run. Feet go missing when a dishwasher is moved, crack under load, or seize after years on a damp floor. A new foot gets it sitting square again.

Part details

• Genuine Haier part H012G1451092B
• Rear adjustable foot
• Freestanding dishwasher version
• Built in and front feet are different part numbers

Fitting and levelling

Switch off at the wall and turn off the tap. With a helper, carefully tip or raise the machine so the rear of the base is clear of the floor. Remove what's left of the old foot and fit the new one. Stand the dishwasher back down, put a spirit level across the top and front, and adjust each foot until the bubble sits in the centre both ways.

Questions about this part

How many feet does a dishwasher need?

Most freestanding dishwashers stand on four feet, two at the front and two at the back. Front and rear feet are often different parts, so count how many rear feet you need to replace and order that quantity of H012G1451092B.