H012G1451092A Genuine Rear Adjustable Foot for Haier Built-In Dishwashers, Rear Levelling Leg, Haier Number 012G1451092A

This is the genuine Haier rear adjustable foot for built-in Haier dishwashers, part H012G1451092A. The rear feet carry much of the machine's weight and are adjusted to level it under the benchtop. Haier sells a different rear foot for freestanding models, H012G1451092B, so make sure you choose the built-in version if your dishwasher is installed under the bench.

Dishwasher rocking or door not closing square?

A dishwasher needs to sit level and firm to work properly. If a rear foot breaks, strips its thread or goes missing, the machine drops at one corner. You may notice it rocking when the door opens, the door rubbing or not closing square, water leaking from a door corner, or the top of the machine no longer lining up with the benchtop. An unlevel tub can also affect draining and the way water meets the door seal. Replacing the foot and levelling the machine again usually sorts these problems out.

Part details

• Genuine Haier part number H012G1451092A
• Haier number 012G1451092A
• Rear adjustable foot for built-in dishwashers
• Freestanding version is H012G1451092B

Fitting the rear foot and levelling

Switch the dishwasher off at the wall and turn off the tap. Slide the machine out carefully, keeping the hoses and cable free, and lay a towel down to protect the floor. Fit the new foot in place of the old one, then adjust it so the machine sits level side to side and front to back. Check the door opens and closes cleanly before refitting any bench fixings.

Questions about this part

Do I need two rear feet?

Only if both are damaged. Check the other rear foot while the dishwasher is out. If its thread is worn or its base is cracked, replacing both at once makes levelling easier.