H0120808157 Genuine Dishwasher Fine Filter Assembly for Fisher & Paykel Dishwashers DW60FC1B2 DW60FC4B2 DW60UC4X2

H0120808157 is the genuine fine filter assembly from Fisher & Paykel, listed for the DW60FC1B2, DW60FC4B2 and DW60UC4X2 dishwashers. It sits in the bottom of the tub and screens food particles out of the water before it is pumped back over the dishes. A torn or warped fine filter lets that debris straight through, so replacing it is one of the simplest ways to fix poor wash results.

Dishwasher leaving grit on dishes or not draining well?

Dishwashers recirculate the same water many times during a cycle, so the filter has an important job. The fine filter sits in the sump and catches small particles that would otherwise be sprayed back onto the dishes. When the mesh tears or the assembly warps and no longer seals, grit and scraps get pumped around the machine and can block the spray arm holes. A clogged filter causes slow draining, standing water in the base, bad smells and cloudy, gritty results on glasses and plates.

Part details

• Genuine Fisher & Paykel part H0120808157
• Fine filter assembly for the dishwasher sump
• Listed for DW60FC1B2, DW60FC4B2 and DW60UC4X2

Fitting the fine filter

Turn the dishwasher off and remove the bottom basket. Twist out the main filter, lift out the old fine filter and wipe out the sump. Seat the new filter flat so it seals all the way round with no gaps, refit the main filter until it locks and run a rinse. Cleaning the filters every week or two keeps the machine draining freely.

Questions about this part

How do I know my model number?

Open the door and look along the edge of the inner door or the side of the tub for the model label. If it reads DW60FC1B2, DW60FC4B2 or DW60UC4X2, this filter is listed for your machine. For other models, send the details through the parts enquiry form.