H0120400061E Genuine Wash Pump Heating Module for Haier Dishwashers, Circulation Pump with Heater

Some Haier dishwashers combine the wash pump and the water heater in a single module, and H0120400061E is a genuine Haier part of that type. One side drives water through the spray arms while the other brings it up to temperature. We don't hold a model list for this number, so confirm it from the label on your existing pump or your dishwasher's model number.

Haier dishwasher not washing or heating? Check the wash pump module

Because one module handles both circulation and heating, its failure can show up in a few ways. If the pump side fails, the dishwasher fills but the spray arms don't turn, dishes come out dirty, and you may hear humming without the usual swish of water. If the heater side fails, wash results drop off, dishes stay wet and greasy, and the machine may stall or show a heating error code. Leaks underneath and tripping power are also common signs. Clean the filters first, since a blocked filter starves the pump.

Part details

• Genuine Haier wash pump heating module
• Part number H0120400061E
• Combines the circulation pump and water heater
• Models not on file, check your old part's label

Replacing the pump heating module

Switch the dishwasher off at the wall, turn off the tap and remove any water from the sump. You'll usually need to pull the machine out of its cavity and reach the module from underneath. Photograph the hoses and wiring, swap the parts across, and use new clamps or seals where supplied. Run a rinse program and check for leaks before sliding the dishwasher back in.

Questions about this part

Can I replace just the heater or just the pump?

On this module the pump and heater are built as one unit, so the module is replaced as a whole. That also means both sides are new once it's fitted, which avoids a second repair later.