H0120300248 Genuine Dishwasher 3 Sided Tub Seal for Fisher & Paykel, Haier Dishwashers DW60CCX1 DW60CEX1 DW60CSX1 HDW100SST HDW201SS
- Original part no.
- H0120300248
- Part grade
- Genuine
- Appliance
- Dishwasher Parts
This part is an order in item. We order it from our supplier once you place your order. It usually takes approximately 5 to 15 days to arrive in store, then we ship it to you or hold it for collection.
Delivery times by state
| WA metro | 1 to 2 business days |
|---|---|
| WA regional | 2 to 5 business days |
| SA and NT | 3 to 6 business days |
| VIC, NSW and ACT | 3 to 6 business days |
| QLD | 4 to 7 business days |
| TAS | 4 to 7 business days |
| Remote areas | 5 to 10 business days |
Estimated times after dispatch. Tracking details are emailed when your order ships.
Local pickup in WAMorley, Myaree or Joondalup
- 3/135 Russell StreetIn stock at this store
Choose Pickup at checkout to collect from our Morley, Myaree or Joondalup store in Western Australia. Please wait for your ready for collection notification before coming in.
Check your model number before ordering. Not sure this part suits your appliance? Send us your model number and we will confirm it for you.
- Genuine manufacturer part
- Tracked delivery Australia-wide
- Parts experts on call
- Secure checkout
Product details
H0120300248 is the genuine three sided tub gasket for Fisher & Paykel and Haier dishwashers, running across the top and down both sides of the tub opening. It's the seal the door presses against when closed. There are 30 models on file, among them the F&P DW60CCX1, DW60CDX3, DW60CEX1 and DW60CSX1, and Haier HDW100SST, HDW101SST and HDW201SS.
Dishwasher leaking from the door
During a wash, water sprays hard against the inside of the door. The tub seal closes the gap between the door and the tub so that water stays inside. Seals flatten, harden, split or lift out of their channel with age, and food scraps or grease stuck to them can hold the door slightly open. Typical signs are water dripping from the top or sides of the door, steam escaping, wet benchtop edges, or water pooling on the floor at the end of a cycle. Clean the seal first. If it's damaged or no longer springs back, replace it.
Part details
- Genuine part H0120300248
- Three sided tub gasket (upper tub seal)
- Suits Fisher & Paykel DW60 dishwashers
- Suits Haier HDW dishwashers
| Type | 3 sided |
|---|
Fitting the tub seal
Switch the dishwasher off at the wall. Pull the old seal out of its channel, starting at one end, and clean any built-up residue from the groove. Start the new seal at the centre of the top and work outward, pressing it in evenly without stretching it, then down each side. Close the door to check it seats all the way round and run a rinse cycle.
Questions about this part
Does this seal go all the way around the door?
No. It's a three sided seal covering the top and both sides of the tub opening. On most dishwashers the bottom edge is handled by a separate seal, so if the leak is along the base, check that area too.
Specifications
| Original part number | H0120300248 |
|---|---|
| Part grade | Genuine : Genuine part supplied by the appliance manufacturer. |
| SKU | H0120300248 |
| Appliance | Dishwasher Parts |
| Shipping weight | 1.5 kg |
Shipping and returns
Shipping
In-stock parts ordered before 2pm AWST on business days are dispatched the same day. We deliver Australia-wide with Australia Post and couriers, with tracking on every order.
Order in parts usually reach us within 5 to 15 days and are then dispatched to you straight away.
Local pickup is also available from our stores in Morley, Myaree and Joondalup, Western Australia. Choose Pickup at checkout and wait for your ready for collection notification before coming in.
Returns
Unused parts in original packaging can be returned within 30 days. Electrical parts that have been fitted cannot be returned unless faulty. Please check your model number before ordering.
You may also need
Recently viewed parts
Can't find the part you need?
Our parts team can source from over 2.4 million parts. Send us your model number and we will come back to you, usually the same day.