H0120200895A Genuine Dishwasher Rack Rail End Cap for Fisher & Paykel, Haier Dishwashers DW60FC4X1 DW60UC6X DW60FC6X1 DW60UN4X2 DW60UZ6B HDW15V3S1

This small genuine part caps the end of the runner rail that a Fisher & Paykel or Haier dishwasher rack glides along. Part number H0120200895A is listed for 24 models, among them the DW60FC4X1 and DW60FC6X1, DW60UC6X and DW60UN4X2 machines and the DW60UZ6B, as well as Haier HDW15G3X and HDW15V3S1 dishwashers. When a cap goes missing, the rack can roll straight off the end of its rail.

Dishwasher rack falling off its rails?

Rack rails let the basket slide out smoothly for loading, and the end caps finish off each rail and act as a stop for the rack wheels. They also cover the open end of the rail so it doesn't snag on cups or hands. Caps are often lost during cleaning or knocked off when the rack is pulled out too hard, and the plastic can crack with age. Without one, the rack may tip, derail or come right out when you pull it, which risks broken dishes and damaged rack wheels.

Part details

• Genuine part H0120200895A
• End cap for the dishwasher rack rail
• Listed for 24 Fisher & Paykel and Haier models
• Covers DW60FC, DW60UC, DW60UN and DW60UZ models plus Haier HDW15 machines

Fitting a rail end cap

Pull the rack out and see which rail end is missing its cap, then compare it with the cap on the other side. Clear away any food scraps or grease from the rail end. Push the new cap onto the rail until it seats fully, then slide the rack in and out a few times to make sure it stops where it should and runs smoothly.

Questions about this part

Will it fit my Haier dishwasher?

It is listed for the Haier HDW15G3W and HDW15G3X, the HDW15V3S1 and the HDW15V3W1, along with 20 Fisher & Paykel DW60 models. Check the model number on the label at the edge of the door or tub and compare it with the list.