H0061801013 Genuine Inverter Board for Haier Fridges, Variable Speed Compressor Drive PCB, Haier Number 0061801013

Genuine Haier part H0061801013 is a compressor drive (inverter) board used in Haier refrigerators that run an inverter compressor. It converts the mains supply into the variable frequency power the compressor needs to change speed. Haier makes several fridge inverter boards with close numbers, including H0061800457E, so the safest check is the label on your existing board. Getting the exact number right saves a wasted order.

Haier fridge compressor not running? Check the inverter board

A fridge with an inverter compressor relies on this board every time it cools. The main control board sends a speed request, and the inverter board turns that into power for the compressor motor. If the board fails, the compressor stays silent or starts briefly and cuts out, and the fresh food and freezer sections slowly lose their cold. Some models also show an error code. Because lights and the display keep working, the fault can look like a gas leak or sealed system problem. Testing the board output, or ruling out the compressor, avoids buying the wrong part.

Part details

• Genuine Haier part number H0061801013
• Haier factory number 0061801013
• Compressor drive board for Haier inverter fridges
• Supplies variable frequency power to the compressor

Before you swap the board

Disconnect the fridge from the power point and give the board time to discharge before handling it. Hold the new board by its edges and keep fingers off the components. Label or photograph every connector, transfer them one at a time and make sure each plug clicks fully home. If you are not confident with electrical work, have a qualified technician fit it.

Questions about this part

What does the H at the start of the number mean?

Haier parts sold in Australia often carry an H in front of the factory number. The label on your board may read 0061801013 without it. Both numbers describe the same Haier part.