H0061800067A Genuine Power Control Board for Fisher & Paykel Side by Side Fridge Freezers RX611DUX1, Main PCB

Fisher & Paykel's RX611DUX1 side by side fridge freezer runs on main control and power board H0061800067A, and this is the genuine part. It switches power to the compressor, fans and other loads based on what the sensors and controls call for. When it fails, the fridge may stop cooling, the display can go dark, or the unit may click on and off without running.

Fridge not cooling or dead display on your RX611DUX1?

Inside a modern fridge, the power board takes mains power and feeds the compressor, fans, lights and defrost heater, all directed by the temperature sensors and user controls. A failed board can show up as no cooling at all, a compressor that won't start, fans that never run, a fridge that won't defrost, a dead or flickering display, or a burnt smell from the back. Many of these symptoms can also come from a faulty sensor, compressor or wiring, so a proper diagnosis matters before you buy a board. Look for scorch marks, swollen capacitors or corroded connectors on the old one.

Part details

• Genuine Fisher & Paykel part H0061800067A
• Main power and control PCB
• Listed for the RX611DUX1 side by side fridge freezer
• Factory replacement board

Fitting the power board

Unplug the fridge at the wall and wait several minutes before touching the board, as stored charge can remain. The board runs at mains voltage, so we recommend a qualified appliance technician fits it. Photograph every connector, fit the new board in the same position, and make sure each plug is fully seated. Let the fridge run for a few hours and check both sides cool down.

Questions about this part

Should I test anything before replacing the board?

Yes. Check that the compressor, fan motors and sensors test OK and that the board is actually receiving power. Boards often get blamed for faults elsewhere, and a technician can confirm the diagnosis before you spend money on a new one.