H0060858473B Genuine Door Flapper Assembly in Black for Haier French Door Fridges, Centre Mullion Flap Seal

On a French door fridge, one of the doors carries a hinged flap that folds out to seal the gap between the two doors when they're closed. H0060858473B is the genuine Haier flapper assembly in black. It comes as an assembly rather than a loose flap. Haier makes flappers in different colours and versions, so check the colour and your parts list before ordering.

French door fridge flapper not folding

The flapper is spring loaded and is usually turned by a small guide on the cabinet as the door closes. If the spring breaks or the hinge cracks, the flap may hang loose, fail to fold out, or catch the other door and stop it closing. A flapper that doesn't seal properly leaves a vertical gap where cold air leaks out, causing condensation, frost on the flap and higher running costs. Some flappers contain a small heater to stop sweating, and if it fails, moisture can form along the flap.

Part details

• Genuine Haier part number H0060858473B
• Door flapper assembly, black
• For Haier French door fridges
• Seals the gap between the two fridge doors

Fitting the flapper

Unplug the fridge, as some flappers have a wire for a heater. Open the door with the flapper and remove the screws or covers along the door edge. Disconnect any plug carefully, lift off the old flapper and fit the new one in the same orientation. Close both doors slowly to check the flap folds out and sits flat against the other door.

Questions about this part

Which door has the flapper on my fridge?

On most French door fridges it's fitted to the left hand door, but some models differ. Open both doors and look for the hinged strip along the inner edge. That door takes the flapper.