H0060402169C Genuine Fridge Fuse Wire Cable 0.75mm for Haier Fridges HBM450SA1

Part H0060402169C is a genuine Haier fuse wire cable with 0.75mm wire, listed for the Haier HBM450SA1 fridge. It is a short fused lead within the fridge's wiring, so it is usually ordered once a technician has traced a dead circuit back to it. Using the genuine Haier lead keeps the fuse and wire size the same as the factory fitted part.

When a Haier fridge needs a new fuse wire cable

A fuse in a fridge's wiring protects a circuit by opening if current or temperature goes past a safe limit. Once it opens, it doesn't reset, so whatever that circuit feeds stays dead until the lead is replaced. Depending on where it sits, that can show up as a fridge that stops cooling properly, a fault light or error, or ice building up where the defrost system should have cleared it. A blown fuse is usually a symptom rather than the cause, so the fault behind it, such as a shorted heater or failed sensor, also needs to be found and fixed.

Part details

• Genuine Haier part H0060402169C
• Fuse wire cable with 0.75mm wire
• Listed for the Haier HBM450SA1 fridge

Fitting the fuse wire cable

Unplug the fridge before you touch any wiring. Trace the old lead from end to end and photograph its routing and connections, then swap it like for like, keeping it clear of sharp edges and cold surfaces where ice can form. Fix whatever caused the old fuse to blow before powering up, then check the circuit works as it should. If in doubt, have a fridge technician do the job.

Questions about this part

Will this cable fit other Haier fridges?

H0060402169C is only listed for the Haier HBM450SA1 on our records. Other models may use a different lead, so compare the old cable and any number printed on it, or check your fridge's model number, before ordering.