H0060401425 Genuine Fridge Sensor Cable for Haier Fridge Freezers HBM450HSA1, Sensor Wiring Harness to the Control Board

H0060401425 is a genuine Haier sensor cable for fridge freezers, listed for the Haier HBM450HSA1. Haier lists it as the sensor cable for the PC board, so it carries signals between the cabinet's sensors and the electronic control that runs the compressor, fans and defrost. Only one model is on file for this part, so check the model on your fridge label before ordering, or send the details through the parts enquiry form.

Haier fridge showing a sensor fault or running too warm?

Modern fridge freezers rely on temperature sensors to decide when to run the compressor, switch the fans on and start a defrost. Those sensors are only useful if their signal reaches the control board intact. A cable that has been pinched behind a panel, chewed, corroded at a plug or cracked where it flexes can feed the board a false reading or none at all. The result can be a sensor error code, a freezer that won't hold temperature, a fridge section that freezes food, or frost building up because the defrost isn't starting when it should.

Part details

• Genuine Haier part H0060401425
• Sensor cable for the fridge PC board
• Listed for the Haier HBM450HSA1
• Fridge freezer wiring part

Checking and replacing the sensor cable

Unplug the fridge at the wall before removing any covers. Trace the cable from the control board out to the sensors and look for damage, loose plugs or corrosion. Photograph each connection and the way the cable is routed and clipped. Run the new cable along the same path, clear of fan blades and sharp edges, then restore power and check the fridge cools normally.

Questions about this part

Will this cable fit my Haier fridge?

The only model on file for H0060401425 is the HBM450HSA1. If the label inside your fridge shows a different model number, send it through the parts enquiry form and we can check the parts list before you order.