H0034001125A Genuine Drain Pump for Haier Washing Machines, Washer Water Outlet Pump Replacement

Genuine Haier pump, part number H0034001125A, for Haier washing machines. In a washer this is the pump that pushes the waste water out through the drain hose at the end of each wash and rinse. Haier uses many different pumps that look similar but differ in their mounting, outlet direction and plug. Compare the label on your old pump with H0034001125A, including the A suffix, before you order.

Haier washing machine not draining

When the drain pump fails, water stays in the tub at the end of the cycle and the clothes come out soaking wet. Some pumps hum without moving water because the impeller is jammed by a coin, hairclip or button. Others go silent when the motor winding burns out. A pump with worn bearings can grind or rattle loudly during the drain. Before buying, check the pump filter if your machine has one and look for blockages in the drain hose, since both cause the same symptoms.

Part details

• Genuine Haier part number H0034001125A
• Pump for Haier washing machines
• Removes waste water through the drain hose
• Compare mounting and plug with your old pump

Changing the pump

Turn off the power at the wall and unplug the washer. Expect water, so have towels and a shallow tray ready before you disconnect the hoses. Photograph the wiring plug and hose positions, undo the mounting screws and swap the pump over. Tighten the hose clamps securely, then run a rinse and spin while watching underneath for leaks.

Questions about this part

My washer hums but won't drain. Is it the pump?

Often it is a blockage rather than a failed pump. Clear the pump filter and hoses first. If the impeller turns freely and the machine still won't drain, test the pump or replace it with H0034001125A.