H0030824393 Genuine Self Adjusting Foot for Haier Washing Machines, Self Levelling Washer Foot Replacement

H0030824393 is a genuine Haier self adjusting foot for Haier washing machines. Unlike a standard screw foot, a self adjusting foot sets its own height to suit the floor when the machine is set down, so the cabinet settles evenly without needing a spanner. If the mechanism jams or snaps, the washer rocks on that corner. Check your parts list for this number before ordering.

Self levelling foot stuck or broken

Self adjusting feet rely on a small sliding or pivoting mechanism, and grit, soap residue or rust can stop it moving. A jammed foot holds the cabinet at the wrong height, leaving the washer rocking on two corners and shaking hard on spin. Feet can also break when a machine is dragged across the floor rather than lifted. Signs to look for are a machine that won't sit still, banging during spin and a cabinet that's visibly lower at one corner.

Part details

• Genuine Haier part number H0030824393
• Self adjusting levelling foot
• For Haier washing machines
• Adjusts to the floor without manual winding

Replacing a self adjusting foot

Turn the washer off at the wall and close the taps. With a helper, tilt the machine forward or onto its side so you can see the base. Note how the old foot is fitted, release it and clean out any dirt from the mounting. Fit the new foot, then set the washer down gently and rock it slightly so the foot finds its height. Check it's level before use.

Questions about this part

Can I fit a standard screw foot instead?

It's best to use the part your machine was designed with. The self adjusting foot is part of how the cabinet levels itself, and a different foot may not sit at the right height. Match H0030824393 with your parts list to be sure.