H0030811660C Genuine Washing Machine Lint Filter for Haier, Fisher & Paykel Top Loaders HWT10AN1 HWT09AN1 HWT08AN1 HWT70FVW3 WL8058G1 WL9058G1

Fluff left on dark clothes after a wash is a good hint the lint filter is damaged or missing. H0030811660C is the genuine Haier lint filter for HWT series top load washers, including the HWT07AN1 and HWT08AN1, the HWT09 and HWT10 models, and the HWT60AA1 and HWT75AA1. It is also listed for the Fisher & Paykel WL8058G1 and WL9058G1.

Haier washing machine leaving lint on clothes?

As water circulates during washing and rinsing, the lint filter catches fluff, hair and loose threads so they are not dumped back onto the load. A filter with a split mesh, a broken clip or a missing cover lets lint straight through, leaving fluff on clothes and grey residue in the tub. A clogged filter that is never cleaned does a poor job too, and over time the plastic frame can crack and fall out during a cycle. Replacing it is a quick job that makes a visible difference to the wash.

Part details

• Genuine Haier part H0030811660C
• Lint filter for top load washing machines
• Listed for Haier HWT07, HWT08, HWT09 and HWT10 models
• Also listed for HWT60, HWT70 and HWT75 plus F&P WL8058G1 and WL9058G1

Changing the lint filter

Turn the washer off first. Find where the old filter sits, take it out and check for any broken pieces left behind in its housing. Push the new filter into place until it locks, and give it a light tug to make sure it is secure. Rinse the mesh after every few washes so it keeps trapping fluff.

Questions about this part

How often should I clean the lint filter?

Rinsing it under the tap after every few loads keeps it working well, and more often if you wash towels or pet bedding. Replace it if the mesh is torn or the frame no longer clips in firmly.