H0030806881C Genuine Drain Hose and Hose Guide for Haier Washing Machines, External Outlet Hose with Guide Hook

H0030806881C is a genuine Haier washing machine drain hose supplied with its hose guide. The hose carries waste water from the pump to your laundry tub or standpipe, and the guide holds the end in a smooth curve so it hooks over the edge without kinking. Haier sells drain hoses in more than one version under this base number, so check the C suffix against your parts list or the old hose.

Washer leaking at the back or draining slowly

A drain hose lives a hard life behind the machine. It gets squashed against the wall, bent sharply, and flexed every time the pump runs. Splits and pinholes show up as puddles behind the washer during the drain or spin part of the cycle. A kinked or flattened hose slows the water down, which can leave clothes soaking wet or trigger a drain error. The guide keeps the outlet end at the right height and shape, and without it the hose can slip out of the tub and flood the floor.

Part details

• Genuine Haier part number H0030806881C
• External drain hose supplied with hose guide
• For Haier washing machines
• Replaces a split, kinked or perished outlet hose

Fitting the new drain hose

Turn the washer off at the wall and drain any water left in the machine into a bucket or onto towels. Release the clamp where the hose joins the machine, pull the old hose off and push the new one fully on before tightening the clamp. Clip the guide near the outlet end and hook it over the tub or into the standpipe. Run a rinse and spin to check for leaks.

Questions about this part

How high should the drain hose sit?

Follow the height range in your washer's installation instructions. If the outlet is too low the machine can siphon water out while filling, and if it's too high the pump has to work harder. The guide helps keep the end at a steady height.