H0030300038A Genuine Tub to Pump Hose for Haier Top Load Washing Machines HWT70AW1 HWT80MW2 HWT60FVW2 HWT10MW1 HWMP75-918 HWM75TL

This genuine Haier hose, H0030300038A, connects the bottom of the wash tub to the drain pump on a long list of top loaders. Current style models include the HWT60AW1 and HWT70AW1, the HWT80 in AW1, MW1 and MW2 versions, the HWT90MW1 and HWT10MW1, and the HWT60FVW2 and HWT70FVW2. Older HWMP machines and the HWM75TL are on the list too.

Top loader leaking underneath or slow to drain?

Every drop of wash and rinse water leaves the tub through this hose on its way to the pump. Because it flexes as the tub moves and sits right where lint, coins and hairpins collect, it can split, rub through or block up. A leaking hose leaves water under the machine, often only while it drains or spins. A blockage shows up as a machine that won't drain, drains slowly, or stops with a drain fault and the clothes still sitting in water. Before buying, get access to the hose and look for splits, kinks or a lump of debris you can feel through the wall.

Part details

• Genuine Haier part H0030300038A
• Tub to drain pump hose
• Listed for HWT60, HWT70, HWT80, HWT90 and HWT10 top loaders
• Also fits older HWMP, HWMSP and HWM75TL models

Fitting the tub to pump hose

Switch off at the wall, turn off the taps and make sure the tub has drained. Put towels down, since the hose will hold some water. Note how the clamps are positioned, remove them, and pull the old hose off its spigots. Clear any debris from the tub outlet and pump inlet, fit the new hose with the clamps in the same spots, and run a drain and spin to check for leaks.

Questions about this part

My model isn't an HWT. Will it still fit?

The hose is also listed for older Haier top loaders such as the HWMP50F, HWMP55-918 and HWMP60-118, plus the HWMP70-118, HWMSP70 and HWM75TL. The TWLW60 and TWLWO50 are on file too. Check your full model number before ordering.