H0030209775 Genuine Pulsator for Haier and Fisher & Paykel Top Load Washing Machines, Wash Plate Impeller

Part H0030209775 is a genuine Haier pulsator, the wash plate in the bottom of a top load washing machine's bowl. Pulsators differ in diameter, fin pattern and how they mount on the drive shaft, and Haier has more than one in its range, so match the number on your old pulsator, or find it in your model's parts list, before you order.

Clothes not moving in a top loader

Instead of a tall agitator, many top loaders use a low pulsator that spins back and forth to roll the clothes through the water. If the pulsator cracks, wears its splines or works loose on the shaft, the drum can sound normal while the clothes barely move, leaving them dirty or with detergent residue. You might also hear clunking or scraping, find clothes snagged on a damaged edge, or see the pulsator wobble. If the pulsator stays still while you can hear the motor running, the splines may have stripped.

Part details

• Genuine Haier part H0030209775
• Pulsator wash plate for top load washers
• Mounts on the drive shaft at the base of the bowl
• Confirm by the number on the old pulsator

Removing and fitting a pulsator

Unplug the machine and empty the bowl. Most pulsators are held by a single screw under a centre cap. Remove the screw and lift the pulsator straight up, which may take a firm, even pull if it's been on for years. Clean any grit from the shaft, check the splines, fit the new pulsator and tighten the screw firmly before refitting the cap.

Questions about this part

Will a pulsator from another Haier model fit?

Not necessarily. Pulsators vary in size and shaft fitting even within one brand, and a poor fit can damage clothes or the drive. Order H0030209775 only if that number matches your old pulsator or your machine's parts list.