H0030207101 Genuine Pulsator for Haier Top Loader Washing Machines, Replacement Wash Impeller Plate

Looking for pulsator H0030207101? This genuine Haier part is the wash plate fitted to the floor of the bowl in Haier top loaders. Haier makes pulsators in several sizes and styles, and this number covers one of them. Before buying, measure your old pulsator and check it for a moulded part number, then compare it with H0030207101 or your model's parts list to be sure you have the right one.

What a damaged pulsator does to the wash

Inside a top loader, the motor drives the pulsator through a splined shaft. Each short burst of rotation drags the water and the load around, then reverses to tumble the clothes over. If the hub splines wear, the pulsator slips and the wash action becomes weak or stops. Cracks in the plate or fins tend to grow, and sharp edges can catch on delicate items. An uneven or wobbly pulsator can also scrape the bowl and make a rhythmic knocking noise.

Part details

• Genuine Haier part number H0030207101
• Wash plate for Haier top loader washing machines
• Fits onto the splined drive shaft at the bottom of the bowl
• Check size and fin pattern against your old pulsator

Removing the old pulsator

Turn the washer off at the wall first. Most pulsators are held by one screw under a cap in the middle. Take the screw out and lift the plate off the shaft, wriggling it gently if it sticks. Wipe out any lint, hair or coins hiding underneath. Line up the new pulsator on the splines, push it down fully and tighten the screw firmly.

Questions about this part

Is this pulsator the same as H0030206236?

No. They are separate Haier part numbers, so don't assume they swap. Pulsators look alike but the size and hub can differ. Match H0030207101 with your old part or your model's parts list, or ask us to check your model number.