H0030101330 Genuine Humidity Sensor for Fisher & Paykel, Haier Clothes Dryers, Moisture Sensing Part for Auto Dry Cycles

Part H0030101330 is a genuine Haier humidity sensor, listed in the Fisher & Paykel and Haier dryer parts range. It reads the moisture in the drum air so a sensor or auto dry program knows when to finish. No compatible models are on file yet. The surest check is the number printed on your old sensor, and if that's worn off, send your dryer's model and serial number through the parts enquiry form.

Dryer finishing early or running too long? Check the humidity sensor

Dryers with automatic or sensor drying programs need a way to judge how damp the load still is. The humidity sensor does that job and passes its reading to the control board, so the cycle ends when the clothes are dry instead of after a set time. If the sensor fails, or gets coated in lint and fabric softener film, the dryer can stop far too soon and leave everything damp. It can also go the other way and run on until clothes are overdried and creased. Clean the sensor area and lint filter before replacing anything, because a dirty sensor gives the same symptoms.

Part details

• Genuine Haier part H0030101330
• Humidity sensor for automatic dry programs
• Listed for Fisher & Paykel and Haier dryers
• No model list on file, confirm by part number

Replacing the sensor

Pull the plug before opening the dryer. Note how the old sensor is mounted and photograph its connector before you unclip anything. Fit the new sensor in the same position and orientation so it reads the air the way the board expects. Then run a sensor dry program with a small damp load and check it finishes at a sensible point.

Questions about this part

How do I know this sensor suits my dryer?

Look for H0030101330 on the old sensor or its lead. If you can't find it, send the model and serial number from your dryer's rating label through the parts enquiry form and we'll check our records before you buy.