H0024000289B Genuine Motor for Haier Appliances, Belt Drive Motor

Before ordering this genuine Haier motor, H0024000289B, check whether the belt is the real problem. Our records show the belt that runs on this motor may be available on its own as part H0180300058, so if the motor itself is fine and the belt has simply stretched or snapped, start there. The model list for this motor isn't on file, so match the part number on your existing motor's label before ordering.

Is it the motor or just the belt?

In a belt driven appliance, the motor turns a pulley and the belt carries that drive to whatever it's connected to. A broken or slipping belt gives symptoms that look like a motor fault, such as the motor running while nothing turns, a squeal on start up, or a burnt rubber smell. A failed motor, on the other hand, usually stays silent, hums without turning even with the belt off, trips the power, or shows a motor error. Spinning the motor pulley by hand with the belt removed helps tell the two apart.

Part details

• Genuine Haier motor, part H0024000289B
• Belt H0180300058 may suit if only the belt has failed
• Replaces a seized, noisy or burnt out motor
• Models not on file, match by part number

Fitting the Haier motor

Unplug the appliance and, if it has a water supply, turn off the taps. Photograph the motor wiring, the belt path and any mounting brackets before removing anything. Fit the new motor, set the belt on the pulleys the same way and check it sits in the grooves. Turn the driven pulley by hand to make sure everything moves freely before a test run.

Questions about this part

Do I need the whole motor if the belt has broken?

Not necessarily. If the motor runs normally and only the belt is damaged, belt H0180300058 may be all you need. Confirm the belt suits your model through the parts enquiry form before ordering either part.