H0024000279D Genuine Heating Element for Haier Washing Machines, Replacement Laundry Heater Element

Part H0024000279D is a genuine Haier heating element for Haier washing machines. It heats the wash water for warm and hot programs. No model list or rating is on file for this number, so confirm the fit by matching H0024000279D to your machine's parts list, or to the number stamped on the old element's mounting plate, before you order.

Haier washing machine not heating the water?

A washing machine heating element sits in the bottom of the tub and warms the water for warm and hot wash programs. The control board uses a temperature sensor to switch it on and off. When an element fails, washes come out cold, programs take far longer than usual, the machine stops with a heating error, or the safety switch trips as soon as heating starts. Scale build-up in hard water areas shortens element life. A quick resistance check will show an open or shorted element.

Part details

• Genuine Haier part H0024000279D
• Heating element
• For Haier washing machines

Replacing the heating element

Unplug the washer, turn off both taps and drain any water left in the drum. The element usually comes out from the back or front, held by a centre nut that compresses a rubber seal. Photograph the wiring and the sensor if one is fitted, ease the old element out, and slide the new one in so it sits in its bracket inside the tub. Check for leaks on the first wash.

Questions about this part

How do I test the old element?

Unplug the machine, remove the wires from the element and measure across its terminals with a multimeter. No continuity means the element is open circuit and has failed. Also check from each terminal to the metal sheath for a short to earth.