H0024000128RB Genuine Door Latch for Fisher & Paykel, Haier Front Load Washing Machines, Washer Door Lock Assembly RB Version

Here's the genuine H0024000128RB door latch for Fisher & Paykel and Haier front load washing machines. It belongs to the H0024000128 door lock family, and the RB letters mark this particular version. Different suffixes have been used across the ranges, so check that the number on your old latch matches H0024000128RB. No model list is on file for this version, so send us your model number if your old part is unreadable.

Front loader won't start or the door won't lock

Before a front loader fills, the door latch locks the door and reports back to the control board that it's safely closed. When the latch wears or its switch fails, the washer may refuse to start, flash a door fault, click repeatedly while trying to lock, or stop part way through a cycle. Some failed latches go the other way and keep the door locked after the wash has finished. Check that the hook on the door itself isn't bent or broken, as that can mimic a faulty latch.

Part details

• Genuine part H0024000128RB
• Door latch and lock for front load washers
• Fisher & Paykel and Haier laundry range
• RB version, match the suffix on your old latch

Swapping the door latch

Unplug the washer before you start. If the door is stuck shut, waiting a few minutes after power off often lets the lock release. With the door open, take off the outer clamp on the door seal and fold the seal back to reach the latch. Undo the screws holding the latch to the front panel, unplug it and fit the new one. Refit the seal and clamp evenly, then run a rinse.

Questions about this part

Can I use another letter version of H0024000128?

Only when your parts list allows it. The letters after H0024000128 mark separate versions, and they aren't always interchangeable. Match the full number on your old latch, or send your washer's model number through our parts enquiry form and we'll check.