H0020301184 Genuine Door Bellows for Haier Front Loading Washing Machines, Rubber Door Seal and Boot

Haier's genuine H0020301184 is a door bellows for a front loading washing machine. This flexible rubber boot surrounds the door opening and joins the cabinet to the tub, so water stays inside the drum during the wash and spin. It's a separate number from the H0020300926 seal range. As we have no model list on file, check H0020301184 against your old seal or parts list before ordering.

Torn, mouldy or leaking door bellows

Because the tub swings and bounces during spin, the bellows flexes constantly every wash. Eventually the rubber can split at the bottom fold, harden or get punctured by small objects caught between the drum and the seal. Signs include water on the floor in front of the machine, a damp door base, foam escaping during the wash or a persistent musty smell. Check the folds closely with a torch, since small tears often hide underneath.

Part details

• Genuine Haier part H0020301184
• Door bellows for front loading washers
• Joins the cabinet opening to the tub
• Separate number from the H0020300926 seal range

Fitting tips for the bellows

Turn off the power and taps, and empty the pump filter into a tray before you start. Take photos of the seal and both clamp rings in place. Work the new bellows onto the tub lip first, matching the drain hole or alignment mark, fit the rear clamp, then stretch the front over the cabinet edge and fit the outer clamp. Run a rinse cycle and look for drips.

Questions about this part

How do I find my washing machine's model number?

On most front loaders the label is around the door opening or on the back of the machine, showing the model and serial number. Compare those with your parts list, or send them to us and we'll confirm whether H0020301184 is the right bellows.