H0020300940N Genuine Door Seal for Fisher & Paykel and Haier Front Load Washing Machines, Door Gasket Bellows

Part H0020300940N is a genuine door gasket for front load washing machines, the rubber seal that links the cabinet opening to the tub and seals against the door glass. The same base number comes with different letter suffixes for different models, so make sure yours ends in N. Haier front loaders, and Fisher & Paykel models built with Haier parts, use this family of seals. Check your model number and product code before ordering H0020300940N.

Front loader leaking from the door? Signs of a worn door seal

The door seal, also called the bellows or boot, flexes every time the drum moves. Over time it can tear, especially at the bottom where coins, underwire and grit collect, and the folds can trap water, lint and detergent that grow black mould. Signs of a failing seal include water on the floor in front of the machine, drips from under the door during the wash, a musty smell that cleaning doesn't shift, and visible splits or holes. A hole high on the seal may leak only when the water level rises.

Part details

• Genuine Haier part H0020300940N
• Front load washer door seal (bellows)
• For Fisher & Paykel and Haier front load washing machines
• Match the full number including the N suffix

Changing a front loader door seal

Unplug the washer and turn off the taps. Remove the outer clamp ring at the front, fold the seal back, and take off the inner clamp at the tub. Note the alignment mark or drain hole so the new seal sits the right way up. Fit the inner lip to the tub first, then the front, refit both clamps, and run a rinse cycle to check for leaks.

Questions about this part

Why are there several H0020300940 seals with different letters?

The letter at the end marks a different version of the seal, usually for different models or production runs. They can differ in shape or fitting, so order the one that matches the number on your old seal or your washer's product code.