H0020300926L Genuine Door Seal Bellows for Haier Front Load Washing Machines, Door Boot Gasket Replacement

The H0020300926L is a genuine Haier bellows seal, the rubber door boot that links the front panel of a front loading washing machine to the tub. It belongs to the H0020300926 family, where different suffix letters can suit different models, drum sizes or door designs. No models are on file for the L version, so check the full number on your old seal or your model's parts list before ordering.

Front loader leaking from the door?

The bellows forms a watertight seal between the door glass and the tub while letting the tub move during the spin. Tears, holes and perished folds let water escape, usually seen as drips under the door or a wet floor after a wash. Coins, underwire and hairpins cause many punctures. Black mould in the folds is another reason to replace a seal, as it often comes back after cleaning and can mark clothes and leave a smell.

Part details

• Genuine Haier part H0020300926L
• Door seal bellows for front loaders
• L suffix version in the H0020300926 family
• Seals between the door and the tub

Changing the door seal

Unplug the machine, turn off the taps and drain any water from the pump filter first. Remove the outer clamp ring from the front, peel the seal off the cabinet lip, then take off the rear clamp holding it to the tub, noting any drain or vent ports. Use the seal's alignment marks, if present, to position it on the tub, fit the inner clamp, then the outer. A smear of soapy water helps it seat.

Questions about this part

Will an H0020300926 seal with another letter fit?

Not necessarily. The suffix letters usually mark differences in port layout, size or profile. Match the L suffix shown on your old seal or parts list, and if the marking has worn off, send us your model number and serial number to check.