H0020300159A Genuine Hot Water Inlet Hose for Fisher & Paykel, Haier Front Load Washing Machines

H0020300159A is the genuine hot water inlet hose for Fisher & Paykel and Haier front load washing machines. It connects the hot tap to the hot inlet on the back of the machine. Inlet hoses are worth replacing at the first sign of wear, because a burst hose under mains pressure can flood a laundry quickly. Check the part number against your old hose or parts list, as hose lengths and fittings vary between models.

Leaking or bulging washing machine inlet hose?

Inlet hoses sit under constant mains water pressure, even when the machine isn't running, unless the taps are turned off. Over the years the rubber hardens and cracks, the hose bulges near the fittings, and the washers inside the ends flatten out. Common signs are drips at the tap or machine end, damp patches behind the washer, a visible bubble on the hose, or a fitting that weeps however hard it's tightened. A hose kinked behind the machine can also slow filling and trigger fill time errors.

Part details

• Genuine part number H0020300159A
• Hot water inlet hose
• For Fisher & Paykel and Haier front load washing machines

Fitting the hot hose

Turn off both taps and unplug the machine. Undo the old hose at the tap and at the machine, with a towel ready for trapped water. Check the sealing washers are seated in each end of the new hose, then do the fittings up firmly by hand plus a small extra turn. Turn the tap on slowly and check both ends for drips.

Questions about this part

How can I tell the hot hose from the cold?

The hot hose runs from the hot water tap to the hot inlet on the machine, which is usually marked red or labelled hot. This listing is the hot hose only, so order the cold hose separately if both need replacing.