H0010403317G Genuine Indoor Unit Fan Motor for Haier Air Conditioners, Indoor Blower Motor Replacement

Airflow from the indoor unit depends on this motor. H0010403317G is a genuine Haier indoor motor for air conditioners that drives the fan, moving air across the coil and into the room. The G at the end of the number marks a specific version, so it needs to match your old motor or the parts list for your model. No models are on file, so send us the indoor unit's model number if you'd like the fit checked.

Indoor unit not blowing air or making noise?

The indoor fan motor spins the fan that pulls room air through the filter and over the cold or hot coil. When the motor fails, the unit may run with little or no airflow, show a fan error, ice up on the coil in cooling, or cut out on overheat in heating. Worn bearings make a growl, squeal or rattle that changes with fan speed. Before blaming the motor, check the filter, the fan for dust build up and the control board.

Part details

• Genuine Haier part H0010403317G
• Indoor unit fan motor
• For Haier air conditioners
• G suffix version, match before ordering

Who should fit it

This is a job for a licensed air conditioning technician or electrician. The system must be isolated at the switchboard, and on wall units the coil and drain tray often need easing forward to free the fan and motor. Note the cable routing and earth connections, check the fan isn't cracked, and test every fan speed once the unit is reassembled.

Questions about this part

Can I fit a motor with a different suffix letter?

Only if Haier lists it as a replacement for your model. The letter often marks a change in connector, speed setting or mounting, so a motor with a different suffix may not plug in or run correctly. Match the full number on your old motor.