EB90-28-1-OLD Genuine Oven Door Hinge Older Design for Technika Ovens and Cookers TB90FSS-2 T948SS-2, Serial Numbers Before 1303

Technika changed the door hinge partway through production, and this genuine part, EB90-28-1-OLD, is the older design. It suits ovens whose serial number begins with four digits lower than 1303. Listed models are the TB90FSS-2 and T948SS-2, and the hinge also carries the number EB70ERCD856O. Ovens built after the change take the later hinge, so check the serial before ordering.

Technika oven door not closing properly

Oven door hinges carry a heavy door on spring-loaded arms that hold it closed against the seal and let it lower gently. Wear in the springs or pivots lets the door fall open too fast, stand slightly ajar, or sit unevenly. Heat escapes past the gap, so the oven takes longer to reach temperature and the front can get hot to touch. A hinge with a broken spring can also snap shut unexpectedly when you try to remove the door, so handle it with care.

Part details

• Genuine Technika part EB90-28-1-OLD
• Older hinge design
• For ovens with a serial number starting before 1303
• Also numbered EB70ERCD856O
• Listed for TB90FSS-2 and T948SS-2

Check the serial, then fit

Read the serial number from the oven's rating label first, as the first four digits decide which hinge you need. Isolate power at the switchboard, let the oven cool and lift the door off with the hinges locked as your manual shows. Swap the hinge, rehang the door and make sure it closes evenly.

Questions about this part

How do I know if my oven needs the older hinge?

Look at the serial number on the rating label. If the first four digits are lower than 1303, this older design is the right hinge. If they're 1303 or later, ask us about the newer version instead.