EB90-28-1-NEW Genuine Oven Door Hinge New Type Single for Technika, Arc Ovens TB90FSS-2 T948SS-2 AOM9SE2 EB70ERCD856

This genuine new type oven door hinge, part EB90-28-1-NEW, suits Technika and Arc ovens built after the hinge design changed. It is sold as a single hinge and also carries the number EB70ERCD856. Models on file are the Technika TB90FSS-2 and T948SS-2 and the Arc AOM9SE2.

Which Technika ovens take the new type hinge

The hinges carry the full weight of the door and control how it opens and closes. A worn hinge lets the door drop heavily, stop short of closing, or hang lower on one side, which lets heat leak out and can damage the door seal over time. This new type hinge is meant for ovens whose serial number starts with four digits higher than 1303. If your serial number begins with 1303 or lower, your oven most likely uses the earlier hinge design, so check before ordering.

Part details

• Genuine part EB90-28-1-NEW, new type hinge
• Also known as EB70ERCD856
• Sold as a single hinge
• For ovens with a serial number starting above 1303
• Listed for Technika TB90FSS-2, T948SS-2 and Arc AOM9SE2

Checking the serial number and fitting

Before ordering, read the serial number on the oven's rating plate and check the first four digits. To fit, turn the oven off at the wall and let it cool. Remove the door as described in your user manual, swap the hinge, then refit the door and check it closes evenly and seals all the way around.

Questions about this part

How do I know if my oven needs the new type hinge?

Look at the serial number on the oven's rating plate. If the first four digits are higher than 1303, this new type hinge is the one to order. Ovens with lower serial numbers used an earlier hinge design that this part is not intended to replace.