EB70ERCD856O Genuine Oven Door Hinge, Old Type for Technika Ovens T948SS-2 TB90FSS-2 with Serial Numbers Before 1303

Technika ovens with a serial number starting below 1303 take this hinge. EB70ERCD856O is the genuine Technika oven door hinge in its original, old type design, listed for the T948SS-2 and TB90FSS-2. The check uses the first four digits of the serial number on the rating label. Later ovens use a newer hinge, so confirm yours before ordering EB70ERCD856O.

Technika oven door sagging or springing open

The door hinges on an oven are spring loaded. They hold the door shut against the seal, slow it as it opens and keep it level. Heavy use, leaning on the open door or simple age weakens the springs and wears the pivots. Typical signs are a door that bangs down when opened, won't stay closed, sits higher on one side or leaves a visible gap at the top. That gap lets heat escape, so food cooks slowly and the controls can get hot.

Part details

• Genuine Technika part EB70ERCD856O
• Old type oven door hinge
• For ovens whose serial number starts with four digits below 1303
• Listed for the T948SS-2 and TB90FSS-2

Checking the serial number and fitting

Find the rating label, usually visible on the oven frame with the door open, and read the first four digits of the serial number. If they are below 1303, this old type hinge is the one to use. With the oven off and cold, lock the hinges, lift the door clear, then swap the hinge and rehang the door, keeping your fingers away from the spring.

Questions about this part

My serial number starts with 1303 or higher. Will this fit?

This old type hinge is listed for ovens with serials below 1303, and later ovens are expected to take the newer hinge. Send your model and serial number through our parts enquiry form and we'll point you to the right part.