EAU61383502 Genuine Drain Pump Motor Assembly for LG Washing Machines, LG AC Pump Motor for Washer Draining

EAU61383502 is a genuine LG AC pump motor assembly, the drain pump motor that empties the tub on LG washing machines. It's the motor section of the pump, which pushes water out through the drain hose at the end of each wash and rinse. There's no model list on file, so match the part number on your old pump's label, or send us the model number from the sticker on the machine.

LG washer not draining or showing an OE error

LG washers report drain problems with an OE code, and the pump is one of the main causes once blockages are ruled out. When the pump motor fails, the machine fills and washes normally but leaves water in the drum, won't spin, and the cycle stops. A failing pump may also hum, buzz or rattle without moving water. Before ordering, clean the pump filter, which sits behind a small cover at the bottom front on front loaders, as coins and lint often jam the impeller, and check the drain hose isn't kinked. If the pump still won't run, replace it.

Part details

• Genuine LG part EAU61383502
• AC drain pump motor assembly
• For LG washing machines
• Confirm fit by part number or model number

Replacing the LG drain pump motor

Unplug the washer and turn off the taps. On front loaders, drain the remaining water through the small emergency hose behind the filter cover into a tray. Depending on the model, the pump is reached from the front or through the base. Photograph the wiring and hose positions first. Fit the new motor to the housing, reconnect it and run a drain and spin to check for leaks.

Questions about this part

Do I need the whole pump housing as well?

Usually not, if the housing and filter are intact. This listing is the pump motor assembly. If the housing is cracked or the filter thread is damaged, you'll need those parts too. Check your old pump against the part number before ordering.