EA6870013000000 OEM Safety Thermostat 145°C suits ILVE Ovens, Overheat Cut-Out Limit Thermostat Replacement

EA6870013000000 is the ILVE number for a 145°C safety thermostat, and this is an OEM replacement for it. It's an aftermarket cut-out made to the original equipment specification for ILVE ovens. The safety thermostat is a protective device that breaks the circuit if the area it monitors gets too hot. Confirm the number on your old thermostat, or in your ILVE parts list, before ordering.

ILVE oven cutting out? The safety thermostat may have tripped

A safety thermostat watches the temperature inside the appliance and cuts power to the heating circuit if it climbs past its 145°C rating. This protects the oven, cabinetry and wiring from overheating. One that has failed open leaves the oven without heat, even though the lights and controls may still seem to work. A thermostat that trips repeatedly often points to another problem, such as a cooling fan that has stopped, a blocked vent or a faulty main thermostat. Find and fix that cause before fitting the new part, or the new one will trip too.

Part details

• OEM aftermarket replacement for ILVE EA6870013000000
• Safety (overheat) thermostat
• 145°C rating
• Suits ILVE ovens

Fitting the safety thermostat

This part sits in the oven's mains wiring, so isolate power at the circuit breaker and have a licensed electrician fit it if the oven is hard-wired. Photograph the connections and the thermostat's position before removing it. Mount the new one in the same spot with good contact to its mounting surface, reconnect the terminals and test the oven through a full heat-up.

Questions about this part

Can I bypass the safety thermostat to test the oven?

No. The safety thermostat protects against overheating and fire risk, so it must never be bridged out in use. Test it for continuity with the power off, and if it's open circuit, replace it with the correct 145°C part.