E2299G041 Genuine Lower Vane for Mitsubishi Electric Air Conditioners, Indoor Unit Airflow Louvre

E2299G041 is a genuine Mitsubishi Electric lower vane, the horizontal louvre that directs airflow out of an air conditioner's indoor unit. Units that use this part have more than one horizontal vane, and this one is the lower of them, so be sure that's the vane you need. Matching E2299G041 against your indoor unit's model and parts list is the best way to confirm fit before ordering.

Air conditioner vane broken, drooping or stuck?

The vanes steer conditioned air up, down or across the room, and on most units they also close over the outlet when the system is off. They are moved by small stepper motors through clips and pivots, so a vane that's been forced by hand or knocked can crack, warp or pop off its mount. Symptoms include a vane hanging at an angle, airflow blowing straight at the floor or ceiling no matter the setting, rattling, or a vane that won't close. If the vane is intact but won't move, the motor may be at fault instead.

Part details

• Genuine Mitsubishi Electric part number E2299G041
• Lower vane (horizontal airflow louvre)
• For the air conditioner indoor unit

Fitting the lower vane

Turn the air conditioner off with the remote, then switch it off at the isolator or circuit breaker. Note how the old lower vane clips onto its pivots and the motor shaft. Ease it off without bending the mounts, then press the new vane on in the same way. Restore power and run swing mode to confirm smooth movement through its full range.

Questions about this part

Where is the model number on my Mitsubishi Electric indoor unit?

Look for the rating label on the side of the indoor unit or under the front panel. It shows the indoor unit model number. Check that model's parts list for E2299G041, or send the model through our parts enquiry form and we'll confirm.