E22915426 Genuine Remote Control for Mitsubishi Electric Split System Air Conditioners, Wireless Aircon Remote Handset

Lost, broken or chewed remote? E22915426 is a genuine Mitsubishi Electric remote control for split system air conditioners. Mitsubishi Electric matches its remotes to particular indoor unit ranges, so the right handset gives you every function your system has. This number isn't linked to models in our records, so confirm it against your parts list, or send us the model from the label on the side of your indoor unit.

Air conditioner remote not working

The remote is how you change mode, temperature, fan speed, vane direction and timers. Without it, most systems can only be run from a small emergency button on the indoor unit. Before replacing a remote, fit fresh batteries and look for a blank or faded screen, cracked casing, sticky buttons or a remote that has been dropped or wet. If the display works but the unit doesn't beep in response, the receiver on the indoor unit could be the issue. Pointing a phone camera at the remote's tip while pressing a button can often show whether it's sending a signal.

Part details

• Genuine Mitsubishi Electric part E22915426
• Wireless remote for split system air conditioners
• Models not recorded, confirm by part number

Setting up the new remote

Fit fresh batteries the right way round. If the remote has a reset button, press it gently with a pen tip after the batteries go in. Set the clock, then point the remote at the indoor unit and switch it on, listening for the beep that confirms the signal was received. Check each mode and the fan speeds work as expected.

Questions about this part

How do I know this is the right remote for my system?

Remotes look alike but suit different indoor unit ranges. Check the number on your parts list or old remote, or send the model from the label on the side of your indoor unit through our parts enquiry form.