DAU063025 Genuine Oven Door Hinge Support for De'Longhi Ovens, Hinge Support Bracket Replacement

Genuine part DAU063025 is a hinge support, numbered alongside De'Longhi's DAU063 oven door hinges. A support like this holds the hinge in the oven frame and takes the door's weight as it opens. There's no model list on file, so compare the old support's shape and mounting holes, and note the model and product code from your oven's rating label before ordering. Send them through our parts enquiry form and we can confirm the fit.

Oven door sagging or hinge loose in the frame

Oven doors are heavy, and every time one is dropped open the hinges and their supports take the shock. A worn or bent support lets the hinge move in the frame, so the door may sag to one side, rub on the frame, or leave a gap at the top where heat escapes. You might also hear a clunk as the door opens. If the hinge itself looks fine but sits loose or crooked where it enters the oven, the support is the likely culprit.

Part details

• Genuine part DAU063025
• Oven door hinge support
• Numbered with the DAU063 hinge parts
• Supplied under De'Longhi DAU numbering

Fitting a hinge support

Isolate the power to the oven and let it cool. Lock the hinges open before lifting the door off, as the springs are strong. Built-in ovens usually need sliding out of the cabinet to reach the hinge mounts, and freestanding cookers may need a side panel removed. If any wiring has to be disconnected on a hard-wired oven, leave that to a licensed electrician. Swap the support, keeping screws and spacers in order, then refit the door and check it closes square.

Questions about this part

Is this the same as the hinge?

No. DAU063025 is the support that the hinge works with, not the hinge itself. Look at where your fault is. If the hinge arm is bent or its spring is weak, you need the hinge, and if the mount it sits in is damaged, you need this support.