CWA75C4762 Genuine Remote Control for Panasonic Air Conditioners CS-Z9RKR to CS-Z24RKR Range, Split System Handheld Remote

Lost the remote for your Panasonic split system? CWA75C4762 is the genuine Panasonic handset listed for the CS-Z RKR range, from the CS-Z9RKR up to the CS-Z24RKR. As the factory remote, it has the buttons and functions those indoor units were built to respond to. Check the model on the indoor unit's label, often on the side of the unit or under the front panel, before ordering.

Panasonic air conditioner remote not working

A split system remote sends infrared signals to a receiver on the indoor unit, so most problems come down to the handset, its batteries or a blocked line of sight. Before buying a new one, fit fresh batteries, clean the battery contacts and point the remote straight at the receiver from a few metres away. If the screen stays blank, buttons have stopped responding after a drop or spill, or the display is faded or cracked, the handset needs replacing. Most settings on a wall split can only be changed from the remote, so a working handset matters.

Part details

• Genuine Panasonic part CWA75C4762
• Handheld remote control for split system indoor units
• Listed for the CS-Z9RKR to CS-Z24RKR range
• Factory replacement for a lost or damaged handset

Setting up the new remote

Put in fresh batteries, set the clock if the handset asks for it, then point it at the indoor unit and press on/off. Most indoor units beep as each command is received. If nothing happens, check the batteries are the right way round and stand directly in front of the unit. No tools or wiring are needed for this part.

Questions about this part

My model is in the CS-Z RKR range but isn't one of the two listed. Will it work?

Our record lists this remote for CS-Z9RKR through to CS-Z24RKR, which suggests the sizes in between share it. To be sure, send the full model from your indoor unit label through the parts enquiry form and we'll check.