{"product_id":"cwa747271-genuine-panasonic-indicator-and-receiver-board","title":"CWA747271 Genuine Indicator and Receiver Board for Panasonic Split System Air Conditioners CS-E18NKR, Indoor Unit Display PCB","description":"\u003cp\u003ePanasonic part CWA747271 is the indicator and receiver board from the CS-E18NKR split system indoor unit. This genuine Panasonic circuit board carries the infrared receiver that picks up the remote, along with the indicator lights on the front of the unit. If the model label on your indoor unit reads CS-E18NKR, this is the board listed for it. Where you can reach the old board, check that its number matches CWA747271 too.\u003c\/p\u003e\n\u003ch2\u003eWhen a Panasonic CS-E18NKR stops answering the remote\u003c\/h2\u003e\n\u003cp\u003eEvery command from the handheld remote lands on this small board first. It picks up the infrared signal, passes it through to the main control board and drives the lamps that show power, timer and mode status. A faulty receiver board usually shows up as an indoor unit that ignores the remote, responds only from very close range, or runs normally while its front lights stay dark. Before blaming the board, fit fresh batteries in the remote and check its screen works. Many Panasonic indoor units also have a manual AUTO button under the front panel. If the unit starts from that button but not from the remote, the receiver board becomes a strong suspect.\u003c\/p\u003e\n\u003ch2\u003ePart details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Panasonic part CWA747271\u003c\/li\u003e\n\u003cli\u003eIndicator and infrared receiver PCB for the indoor unit\u003c\/li\u003e\n\u003cli\u003eListed for the Panasonic CS-E18NKR indoor unit\u003c\/li\u003e\n\u003cli\u003eDrives the front indicator lights and receives remote signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSwapping the receiver board\u003c\/h2\u003e\n\u003cp\u003eTurn the system off and isolate it at the circuit breaker or outdoor isolator before removing the front panel. Photograph the lead and plug that join this board to the main board, and note how the cable is routed and clipped. Handle the new board by its edges to avoid static damage. As the air conditioner is hard wired, the job should be done by a licensed electrician or air conditioning technician.\u003c\/p\u003e\n\u003ch2\u003eQuestions about this part\u003c\/h2\u003e\n\u003ch3\u003eHow do I find my indoor unit's model number?\u003c\/h3\u003e\u003cp\u003eLook for the rating label on the side of the indoor unit or under the front panel. Panasonic indoor unit model numbers start with CS, while outdoor units start with CU. For this board, the indoor label should read CS-E18NKR.\u003c\/p\u003e","brand":"Panasonic","offers":[{"title":"Default Title","offer_id":44551170261070,"sku":"CWA747271","price":125.19,"currency_code":"AUD","in_stock":true}],"url":"https:\/\/partsshop.com.au\/products\/cwa747271-genuine-panasonic-indicator-and-receiver-board","provider":"My Store","version":"1.0","type":"link"}