AGF30196101 Genuine Drain Pump for LG Top Load Washing Machines WTG1034WF WTG1234WF WTG1434WHF WTG1434VHF WTR1234WF WTG1034BF

Get an LG top loader pumping out again with genuine drain pump AGF30196101. Listed models start with the WTR1234WF and take in the WTG1434WHF, WTG1434VHF and WTG1434BHF, then the WTG1234WF plus the WTG1034WF and WTG1034BF. LG also uses the AHA75673402, AHA75673403, AHA75673404 and AHA75673405 numbers for this pump, so a match with any of them on your old part is a good sign it is the correct replacement.

LG top loader not draining or stopping on OE

Once the wash or rinse finishes, the drain pump empties the tub so the machine can spin. If the impeller jams on a coin, hair tie or underwire, or the motor burns out, water stays in the bowl and the washer usually stops with an OE error. Some pumps hum loudly but move little water, others make no sound at all. Clothes left dripping wet after a full cycle and a slow, gurgling drain are other common signs. Check the drain hose for kinks or blockages first, as these cause the same symptoms.

Part details

• Genuine LG drain pump AGF30196101
• Linked numbers AHA75673402, AHA75673403, AHA75673404 and AHA75673405
• Listed for seven LG WTG and WTR top load washers
• Empties the tub before each spin

Changing the drain pump

Unplug the washer and turn off the taps. Bail out or drain any water left in the tub, then tilt or lay the machine as needed to reach the pump at the base. Photograph the hose clamps and wiring plug before removing them, fit the new pump with the hose pushed fully on, and run a drain and spin with no load to test.

Questions about this part

Is AGF30196101 the same as AHA75673405?

These numbers are linked to the same LG top loader drain pump, along with AHA75673402, AHA75673403 and AHA75673404. If your old pump carries one of them and your washer is a listed WTG or WTR model, this pump is the match.