A569438 Genuine Oven Door Hinge for Ariston Ovens, Replacement Hinge for a Sagging or Loose Ariston Oven Door

Oven door dropping open, sitting crooked or refusing to close properly? A569438 is a genuine Ariston oven hinge, the part that carries the door's weight and controls how it opens and closes on Ariston ovens. Hinges wear at a similar rate, so check both sides. Our records don't carry models for A569438, so confirm the number on the old hinge or in your oven's parts list first.

What a worn Ariston oven hinge does to the door

Each hinge combines a pivot with a spring that balances the door's weight, so the door holds part way open and closes firmly against the seal. With age the springs weaken and the moving parts wear. When a hinge goes, the door may fall open suddenly, sag to one side, bounce back up, or leave a gap at the top where heat and steam escape. A door that won't close evenly also wears the seal faster and can let the fascia and knobs run hot. A broken hinge is a safety issue too, as a heavy glass door can drop without warning.

Part details

• Genuine Ariston part number A569438
• Oven door hinge
• For Ariston ovens
• Check the old hinge's number and side before ordering

Changing an oven hinge

Turn the oven off at the wall and let it cool. Open the door fully and lock the hinges, often by flipping a small lever or clip, before lifting the door off. Never release a hinge under spring tension without it locked. Swap the hinge out of the oven body, refit the door, release the locks and check it opens and closes evenly.

Questions about this part

Should I replace both oven hinges together?

It's good practice. Both hinges carry the door and wear at a similar rate, so a new hinge paired with a tired one can leave the door uneven. Check the parts list, as some ovens use a different number for each side, then order the quantity you need.