973925061015005 Genuine Configured Electronic Board ERF2507 for Electrolux Refrigerators, Fridge Control PCB Replacement

Part 973925061015005 is a genuine Electrolux configured electronic board on the ERF2507 platform, used in Electrolux group refrigerators. The board comes programmed for the range it belongs to, which is why two ERF2507 boards with different numbers may not swap over. We don't have compatible models recorded for this one. The quickest check is the label on your current board, which should show 973925061015005.

When an ERF2507 board is behind a fridge fault

Every cooling decision in the fridge runs through this board. It takes readings from the temperature probes, then switches the compressor, fans and defrost heater to suit. When the board fails, people usually notice warm food, a freezer that has gone soft, a fridge that runs all the time, or a control panel that goes blank or shows an error. A faint burning smell near the board housing is another clue. Check the power supply and test the sensors before deciding the board is at fault.

Part details

• Genuine Electrolux configured board 973925061015005
• ERF2507 electronic platform
• Pre-loaded software for its model range
• For Electrolux group refrigerators
• No model list on file, confirm by part number

Replacing the ERF2507 board

Switch off at the wall and unplug the fridge before touching the board. Take a photo of the connectors, release the locking tabs gently and avoid pulling on the wires. Fit the new board, reconnect everything exactly as before, then power up and allow a few hours for the cabinet to cool before checking temperatures.

Questions about this part

Where do I find the board number on my fridge?

It's printed on a sticker on the board itself, which normally sits inside a plastic housing at the back or top of the fridge. The fridge's model and product number are on the rating label, usually inside the fresh food section. Send those through the parts enquiry form if you'd like us to check.