973925060901007 Genuine Configured Main Electronic Board ERF2600 FCT for Electrolux Fridges, Main Control PCB

Looking for 973925060901007? This genuine Electrolux main electronic board belongs to the ERF2600 platform and is recorded as the FCT version. It's a configured part, which means it is set up for particular Electrolux group fridge models rather than every fridge on that platform. We don't have a model list for it yet, so compare the full number on the label of your existing main board before ordering.

Signs the main board in your Electrolux fridge has failed

The main electronic board does the switching for the whole fridge. It powers the compressor, controls the evaporator and condenser fans, triggers the defrost heater and talks to the user display. Common clues to a failed main board include a fridge that runs nonstop, a compressor that clicks but never starts, a freezer with ice coating the back panel, or a display that flashes an error. Faults in the sensors, defrost heater or display board can mimic a bad main board, so test those parts first.

Part details

• Genuine Electrolux main electronic board 973925060901007
• ERF2600 platform, FCT version
• Supplied configured for its fridge range
• Replaces the main control PCB
• Match the full number before ordering

Before you fit the main board

Isolate the fridge at the power point and unplug it. The main board usually sits behind a cover at the back or on top of the cabinet. Label or photograph each connector, transfer them one by one and make sure the earth and mounting screws go back in. If you're not comfortable around mains wiring, a qualified technician should do the job.

Questions about this part

Is the main board the same as the display board?

No. The main board does the power switching and control, while the display or user interface board is the panel you press. Some fridges have both, so check that the label on the board you're replacing reads 973925060901007.